Product ID:COMPOUND 1075, PART A
MSDS Date:01/01/1987
FSC:8040
NIIN:00F003893
MSDS Number: BBNZV

Emergency Phone: (404) 451-2777

Cage: 22121

Telephone: (770) 451-2777/(800) 457-4280

Cage: 22121

VINYL CYCLOHEXENE DIOXIDE

CAS: 106-87-6

RTECS: RN8640000

Fraction By Weight: 6%

OSHA PEL S, 10 PPM

ACGIH TLV: S, 10 PPM ;A2; 9192

Effects of Overexposure:SKIN/EYE IRRITATION. A SKIN SENSITIZER.
INHALATION: MAY CAUSE RESPIRATORY TRACT IRRITATION.

First Aid:SKIN: REMOVE CONTAMINATED CLOTHING. WASH W/SOAP & WATER.
LAUNDER CLOTHING PRIOR TO RE-USE. EYES: FLUSH W/WATER FOR 15
MINUTES. GET MED ATT. INHHALATION: REMOVE VICTIM TO FRESH
AIR.ADMINISTER OXYGEN. I NGESTION: DON'T VOMITING. GIVE WATER.

Flash Point:>200F (PMCC)
Extinguishing Media:WATER SPRAY, FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:IN CONFINED AREA, NIOSH APPROVED SCBA. WATER
COOL CONTAINERS
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:AVOID CONTACT WITH LIQUID AND VAPORS. WIPE
WITH A CLOTH OR COLLECT ON ABSORBENT MATEAL. LARGE SPILLS: DIKE AND
CONTACT. PUMP OR SHOVEL INTO SALVAGE VESSELS.

Handling and Storage Precautions:STORE IN A COOL, DRY AREA IN TIGHTLY
CLOSED CONTAINERS. AVOID CONTACT WITH SKIN/EYES. USE W/ADUATE
VENTILATION. USE GOOD HYGIENE PRACTICES.
Other Precautions:RCRA STATUS: NOT CONSIDERED TO BE A HAZARDOUS WASTE.

Respiratory Protection:NIOSH APPROVED RESPIRATOR FOR ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST AND MECHANICAL
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING/BOOTS. EYE-WASH
STATION/SAFETY SHOWER.
Supplemental Safety and Health
13 JUN 1986.

Boiling Pt:B.P. Text:>225F
Vapor Pres:NIL
Vapor Density:>1
Spec Gravity:2.40
Evaporation Rate & Reference:(BU AC = 1) <1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK VISCOUS LIQUID
Percent Volatiles by Volume:0%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS AND BASES.
Stability Condition to Avoid:ELEVATED TEMPERATURES
Hazardous Decomposition Products:OXIDES OF CARBON AND NITROGEN
Conditions to Avoid Polymerization:LARGE MIXTURES IN BULK. CURING
PROCESS IS EXOTHERMIC.

Waste Disposal Methods:CURE, THEN BURY OR INCINERATE WHERE PERMITTED BY
FEDERAL, STATE AND LOCAL REGULATIONS. REMOVE SALVAGE VESSELS TO A
WASTE DISPOSAL SITE OPERATING IN COMPLIANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.